Woodland Scenics ST1410 2% Incline/Decline Set, 8 Sections
- Marca / fabricante
- Woodland Scenics
- Tipo de producto
- Model Train Accessories
- Escala indicada
- Multi-scale; widen for O scale
- SKU
- WOO1410
Disponible para pedir
Create a gradual change of track elevation with Woodland Scenics ST1410. Eight shaped foam sections form a nominal 2% incline or decline, following straight track or curves without building each support from scratch. Features and contentsEight...
- Revisa las fotos del anuncio, las especificaciones y las notas sobre el estado.
El envío, los impuestos y los descuentos aplicables se calculan al finalizar la compra.
Descripción
Create a gradual change of track elevation with Woodland Scenics ST1410. Eight shaped foam sections form a nominal 2% incline or decline, following straight track or curves without building each support from scratch.
Features and contents
- Eight high-density foam sections raise or lower the track by 4 inches (10.1 cm) over a 16-foot (4.87 m) run.
- Each section is 2 1/2 inches wide x 24 inches long (6.35 x 60.9 cm).
- One set makes either one full incline or one full decline; use two sets for both directions.
- Install additional sets side by side for O-scale track width or a double-track route.
- Pin into position, then attach with Foam Tack Glue or a suitable low-temperature foam adhesive. Cover with Plaster Cloth before laying track.
- Model-making product for ages 14 and up; not a toy.
Product details
- Manufacturer: Woodland Scenics
- Manufacturer part number: ST1410
- Scale: Multi-scale; widen for O scale
Includes eight graded foam sections. Layout fitting and installation are required; track, roadbed, risers, pins, adhesive and Plaster Cloth are separate.
Explore Woodland Scenics scenery or model train accessories.
Detalles
- Marca / fabricante
- Woodland Scenics
- Tipo de producto
- Model Train Accessories
- Escala indicada
- Multi-scale; widen for O scale
- Referencia del fabricante
- ST1410
- SKU
- WOO1410
Comprueba que la escala y el ancho de vía indicados coincidan con tu maqueta. En las locomotoras, revisa el sistema de alimentación, el decodificador y los detalles de sonido; preparado para DCC no significa que tenga un decodificador instalado. En el material rodante, comprueba los enganches, el espacio necesario y el radio mínimo requerido por el fabricante cuando se indique.
Envío
El envío, los impuestos y los descuentos aplicables se calculan al finalizar la compra.
Reseñas de coleccionistas
Lee comentarios específicos del producto, fotos y experiencias de compradores sobre este listado.
