Bandai Gundam Decal No.17 MG Multiuse Zeon 1/100 Waterslide Decal #1134135: Printing & Application Guide

Bandai Gundam Decal No.17 MG Multiuse Zeon 1/100 Waterslide Decal #1134135 is made for model builders who want crisp markings and small printed details without trying to paint every symbol by hand. Surface preparation, careful placement, and drying time matter more than speed.

A closer look

Bandai Gundam Decal No.17 MG Multiuse Zeon 1/100 Waterslide Decal #1134135 is a Bandai waterslide decal set for model-kit detailing. It is identified by manufacturer item 1134135 and matches the exact subject and scale named in the title.

The stated scale is 1/100. That scale should match the surrounding model, layout, or collection.

The Muncle Mikes SKU is BAS1134135. It is useful when nearby products have similar names.

Prepare a smooth surface

Waterslide decals settle best over a clean gloss or satin finish. Paint should be fully cured, and dust or fingerprints should be removed before the first marking is soaked. A rough flat surface can trap air beneath the carrier film and leave a pale edge around the artwork.

Apply one marking at a time

Cut close to the printed design, dip the piece briefly in clean water, and let it rest on the backing until the film begins to move. Slide it onto the model with a damp brush, adjust the position gently, and roll away extra water with a cotton swab. Pulling the swab sideways can move or tear a small marking.

Work carefully around curves and panel lines

A setting solution can improve adhesion, while a stronger softening solution can help the film conform to recessed lines or curved armor. Test the paint and solution combination first. Once a softener is applied, leave the decal alone until it has dried, even if the film briefly looks wrinkled.

Protect the finished markings

Allow the decals to dry completely before clear coating. Begin with light coats so the carrier film, ink, paint, and clear finish can settle together without reacting. The final sheen can be flat, satin, or gloss to suit the model, but compatibility matters more than the brand name on the bottle.

Getting the best result from this decal set

Work in small sections, keep the backing sheet dry except for the marking being used, and test the paint–decal–clear-coat combination before committing to the finished model. Small markings are easier to control when the model is supported at a comfortable angle.

There is no need to use every marking. A restrained, consistent placement plan usually looks more convincing than filling every open panel simply because another decal is available.

Keep carrier film from drawing attention

Trim excess film where practical and avoid placing a large clear edge across raised detail or a deep groove. A smooth undercoat, careful water removal, and a compatible final clear coat help the printed marking look like part of the model rather than a sticker laid on top.

Use restraint on a small-scale build

At smaller scales, a few well-placed markings can communicate more than a crowded surface. Leave some plain paint around important symbols so the eye can read the design from normal viewing distance.

Study the exact product photographs

What to verify when Bandai Gundam Decal No.17 MG Multiuse Zeon 1/100 Waterslide Decal #1134135 arrives

Keep the shipping carton, product packaging and order confirmation until the item has been inspected. Compare the title, visible finish, quantity, selected option and included pieces with the saved listing photographs. Check delicate edges, clear parts, printed markings, connectors and moving pieces before the product is used.

Photograph anything that differs before assembly, paint, installation or package removal. Once permanent work begins, it becomes harder to separate a delivery problem from a change made during the project. Store the instructions and unused accessories with Bandai Gundam Decal No.17 MG Multiuse Zeon 1/100 Waterslide Decal #1134135 so the product can be identified later without relying on memory.

Build-planning questions

Is the product ready to use without additional supplies?

Not necessarily. Paint, primer, cement, cutting tools, decal solution or mounting materials may be separate unless the contents say otherwise.

What should be dry-fitted?

Test the main assemblies, clear parts, mounting points and any accessory footprint before paint or adhesive makes the fit harder to correct.

Does the scale label answer every size question?

No. Compare actual dimensions and the intended subject, because products in the same nominal scale can represent very different real-world sizes.

How should finishing products be chosen?

Use the material and manufacturer instructions, then test the complete primer, color, decal and clear-coat system on a spare piece.

For related projects, browse Scale Model Accessories, Figures & Display Supplies · Bandai Model Kits, Figures & Accessories.

View Bandai Gundam Decal No.17 MG Multiuse Zeon 1/100 Waterslide Decal #1134135 at Muncle Mikes