COLLECTOR GUIDE
Hot Wheels ’55 Chevy Bel Air Gasser Collector Guide
A little Chevy with a big drag-strip personality.
A raised front end, an engine pushing through the hood and oversized rear tires turn this 1955 Chevrolet into a miniature drag racer. Brendon Vetuskey’s ’55 Chevy Bel Air Gasser joined Hot Wheels in 2013. Since then, its long sides have carried everything from old-fashioned speed-shop lettering to the pink Candy Striper and dinosaur-themed Triassic-Five designs.
By Muncle Mikes · Updated .
Official IdentificationThe 1955 Chevy, reimagined as a nose-high drag racer.
2013Hot Wheels debut
Finished custom
Official Identification
Where the Hot Wheels Gasser began
Hot Wheels introduced this casting—the underlying body design—in 2013. The first cars wore Tuske Gasser and Holst Auto Service lettering, with gray and champagne-colored versions giving the Chevy the look of a garage-built racer. Designer Brendon Vetuskey’s name is closely tied to the model: he also built a full-size ’55 Chevy Gasser of his own. [1] [2]
The model’s stance is its signature. The front sits high, the rear tires fill the back wheel openings, and the engine and exhausts are part of the silhouette. Even with the paint removed, it has a very different shape from a stock-height ’55 Chevy.
The “’55” is the Chevrolet’s model year. “Bel Air Gasser” identifies this Hot Wheels design; the similarly styled ’64 Nova Wagon Gasser is a separate car.
Variation SummaryEarly speed-shop graphics, collector editions and later mainlines.
Finished custom
DIY project
Finished custom
Variation Summary
| Release | Color and decoration | Collector detail |
|---|---|---|
| 2013 debut | Gray or metallic champagne; Tuske Gasser / Holst Auto Service lettering. | The original look of Vetuskey’s casting. |
| Candy Striper | Pink body with a white roof and pink stripes. | Mattel states that 4,000 original 1:64 cars were made in 2015. |
| 2021 Triassic-Five · HGW21 | Spectraflame bright green, white roof and dinosaur graphics. | A detailed miniature of the designer’s own full-size Chevy. |
| 2022 Triassic-Five mainlines | Matte olive · HCV06; matte pink · HCW89. | The same drag-racing theme in the regular Hot Wheels range. |
| 2023 HW Gassers | Yellow · HKH61; light blue · HKK26. | Tri Five Terror lettering gives this pair a different racing identity. |
These releases show how much the Gasser’s appearance can change without losing its raised-front stance. Mainline means the regular Hot Wheels range. Collector editions may add more detailed decoration, special finishes and rubber tires. [1] [2] [3]
Notable Releases
Candy Striper
The pink-and-white Candy Striper is one of the Gasser’s defining collector editions. Mattel describes the original 1:64 release as a 4,000-car run from 2015. Its candy-colored roof stripes and racing lettering make it recognizable even among a shelf full of other Gassers. [3]
Triassic-Five
This car has a real-life counterpart in Brendon Vetuskey’s garage. Its name combines “Tri-Five,” the nickname for 1955–1957 Chevrolets, with a dinosaur theme. The HGW21 miniature has a bright green Spectraflame finish, a gloss-white roof, slotted front wheels and wide rear drag slicks. The windshield is clear, while the side and rear windows have a light green tint. [2]
Spectraflame is Hot Wheels’ translucent, metallic-looking finish. It gives the green collector car a different appearance from the matte olive and matte pink mainlines.
Physical DetailsThe engine, stance and rear tires give the casting its character.
BADMAN custom · View 1
BADMAN custom · View 2
BADMAN custom · View 3
Physical Details
View the Gasser from the side and three features stand out: the space above the front tire, the tall engine, and the broad rear tire. The long door and rear quarter panel leave plenty of room for a racing name and sponsor graphics. That is why lettering changes the character of this casting so dramatically.
The yellow BADMAN custom shown above uses bold black side graphics and Goodyear lettering on the rear tires. Our pearl-white custom takes a different approach, pairing orange graphics and copper-colored details with black five-spoke wheels. The body is familiar, but the finishes give the two cars very different looks.
On a loose Gasser, the exposed engine and exhausts deserve a close look. Scuffed chrome is easy to miss in a bright photograph. Chipped paint around the front fenders and bent axles also stand out when the model is displayed at eye level.
Customs & DIY
The Gasser gives a custom builder three strong areas to work with: the roof, the large side panels and the engine. A contrasting roof separates the cabin from the body, while side lettering can turn a simple paint scheme into a named drag car. Rear tire choice has a large effect on the finished stance.
Our stripped kit lets you start with the bare body instead of removing an existing finish. The listing gives a 10–12 mm factory wheel-size reference. Check tire width and axle length as well as diameter when choosing replacement wheels.
For a finished model, compare the yellow BADMAN’s black graphics with the pearl-white car’s orange and copper details. For a project of your own, visit the Hot Wheels customizing guide.
Packaging DetailsCarded factory releases, finished customs and project kits.
CUSTOMS & KITSFeatured shop models
Finished custom
Packaging Details
The regular Hot Wheels release is usually sold in a clear blister attached to a printed card. On the card, the series name and car name help distinguish a factory release from another Gasser with similar colors. Collectors who keep cars packaged also look for an intact blister and clean card corners.
Our yellow BADMAN custom comes with a display case. The stripped Gasser kit is an unfinished project prepared for painting; custom wheel upgrades are sold separately. A finished custom and a kit are two different ways to enjoy the same body design.
Condition and choosing a car.
Notable ReleasesEditions with a story.
FAQCommon collector questions.
Related ModelsFind your collecting direction.
Buying & Value — Full Guide
Buying Guide
For a colorful display, the matte Triassic-Five pair or the yellow and blue Tri Five Terror cars make natural companions. If the connection to a real drag car interests you, the green HGW21 Triassic-Five is the edition to explore. Candy Striper belongs on a different wish list: its limited original run is part of its collecting history.
Condition matters on these cars because so much bright metal is exposed. For a loose example, look at the engine, side exhausts, tire lettering and axle alignment. For a carded example, include the card and blister condition when comparing recent sold prices.
A custom’s appeal comes from its paintwork, wheels and builder’s finish. The BADMAN and pearl-white cars below are Muncle Mikes customs, with their own styling rather than factory-series identities.
’55 Chevy Bel Air Gasser — Frequently Asked Questions
’55 Chevy Bel Air Gasser collector FAQs
Who designed the ’55 Chevy Bel Air Gasser?
Brendon Vetuskey. The casting debuted in 2013, and his own full-size Chevy later inspired the Triassic-Five collector edition.
What is the Candy Striper Gasser?
A pink-and-white collector edition. Mattel states that 4,000 original 1:64 cars were made in 2015.
What makes the green Triassic-Five different from the mainline cars?
HGW21 has a bright green Spectraflame finish, a white roof and Real Riders wheels with rubber tires. The 2022 mainline cars use matte olive or matte pink paint.
Is the BADMAN Gasser a factory Hot Wheels release?
It is a Hot Wheels car customized by Muncle Mikes. The yellow paint, BADMAN graphics and wheel setup belong to that custom build.
Can I paint my own Gasser?
Yes. The stripped kit below is prepared for painting. Custom wheel upgrades are sold separately.
Shop Matching ’55 Chevy Bel Air Gasser Models
Related Models & Collecting Choices
| You enjoy… | Start with… |
|---|---|
| A finished drag-racing custom | Yellow BADMAN with display case |
| A lighter paint scheme and black wheels | Pearl-white and copper custom |
| Painting your own racing graphics | Stripped Gasser kit |
Shop ’55 Chevy Bel Air Gasser at Muncle Mikes
Choose a finished custom or a kit for your own Gasser build.

Finished custom
Yellow BADMAN Racing Gasser
Yellow paint, black BADMAN graphics and Goodyear-lettered rear tires give this custom a drag-strip look.
Includes a display case.
View model
DIY project
Stripped ’55 Chevy Gasser kit
A bare-metal Gasser prepared for painting. Choose your own colors and racing graphics.
Custom wheel upgrades sold separately.
View kit
Finished custom
Pearl white and copper Gasser
Pearl-white paint, orange graphics and copper-colored details with black five-spoke wheels and rubber tires.
Customized by Muncle Mikes.
View modelOpen a product to see its full photo gallery, price and availability.
Keep exploring.
’67 Camaro guideTwin Mill guideSkyline R32 guideCustoms & DIY GuideAll Collector Guides
Collecting Terms, Sources & Model References
Collecting terms
Casting: the body design shared by different releases. Mainline: the regular Hot Wheels range. Spectraflame: a translucent finish with a reflective metallic appearance. Real Riders: Hot Wheels wheels with rubber tires. Tri-Five: a nickname for the 1955, 1956 and 1957 Chevrolets.
Sources & model references
- Hot Wheels Wiki: ’55 Chevy Bel Air Gasser — debut and release list.
- Mattel Creations: Triassic-Five ’55 Chevy Bel Air Gasser, HGW21.
- Mattel Creations: Candy Striper — original 1:64 production history.
- Muncle Mikes product descriptions and photographs.

