'83 Silverado High Roller — Printable Decal PDF

Detalles del producto

Mockup preview: Finished-truck images are illustrative application previews. Your download contains flat waterslide decal artwork only; no physical car or printed decals are included.

Give your ’83 Silverado project a bold red racing look with High Roller lettering, white dice borders and matching center graphics.

Digital waterslide decal artwork download only. No physical car or printed decals are included.

What is included

One single-page, decal-only PDF with two opposite-side wraps and three center pieces. The PDF has no instruction pages, headings, rulers, calibration bars or placement labels. The listing image matches the included artwork.

File size and model fit

The PDF uses a US Letter page (215.9 × 279.4 mm; 8.5 × 11 inches). The complete artwork arrangement measures 49.73 × 77.50 mm, including spaces between pieces. These are whole-arrangement dimensions, not the size of one wrap. The established artwork and print size are unchanged. The reference sheet is labeled ’83 Silverado; check your exact casting and each panel before using waterslide paper.

Print at Actual Size / 100%

1. Open the PDF itself, not a screenshot or listing image.
2. Load US Letter paper (8.5 × 11 inches), select US Letter in the printer settings, and choose Actual Size / 100%.
3. Turn off Fit to Page, Shrink to Fit and borderless enlargement. The artwork is intentionally smaller than the paper. Keep it at its supplied size.
4. Print on ordinary paper first. Check both wheel openings, body ends, panel heights and all three center pieces. Do not stretch width and height separately to force alignment.

Keep the dice and lettering white

Ordinary home color printers do not print opaque white. On clear film, white dice and lettering show the paint underneath. Use a suitable white-painted base, white decal film or white-ink process. Trim white film closely while preserving the intended white artwork.

Choose waterslide paper explicitly compatible with your printer. Follow the exact paper’s instructions for printable side, drying, sealing, soaking and transfer orientation. Mirror only when the paper’s transfer method requires it. No-spray instructions are specific to the paper and do not guarantee every ink combination.

Apply and finish

Test your ink, paper and paint on a spare surface. Apply to clean, smooth, fully cured paint. Support wet film during positioning, gently remove trapped water and air, and leave it undisturbed for the manufacturer’s drying time. Test softeners and final clear finishes separately before using them on the model.

Help and supplies

Ink runs: check paper, drying and sealing. White disappears: check film and body color. Openings miss: check print scale and panel geometry.

Read the complete waterslide printing, application, supplies and troubleshooting guide.

Photo-derived raster artwork in a PDF; not an editable vector or cutting-machine file. Fine detail and color are limited by the source photograph.

Print scale check

Download the separate 50 mm calibration page. Print it at Actual Size / 100% with Fit to Page disabled, then measure between the two end ticks. Test the decal artwork on plain paper against your exact casting before printing on waterslide paper.

Recommended decal paper, tools and application supplies