'83 Silverado Zephyr Racing Fuels — Printable Decal PDF

Detalles del producto

Mockup preview: Finished-truck images are illustrative application previews. Your download contains flat waterslide decal artwork only; no physical car or printed decals are included.

Give your ’83 Silverado project a red-and-blue racing finish with Zephyr Racing Fuels emblems, sweeping stripes and matching center graphics.

Digital waterslide decal artwork download only. No physical car or printed decals are included.

What is included

One single-page, decal-only PDF with two opposite-side wraps and three center pieces. The PDF contains no instruction pages, headings, rulers, calibration bars or placement labels. The listing image matches the artwork included.

File size and model fit

The PDF uses a US Letter page (215.9 × 279.4 mm; 8.5 × 11 inches). The complete artwork arrangement measures 49.12 × 77.50 mm, including the spaces between pieces. These are whole-arrangement dimensions, not the dimensions of one wrap. The established artwork and print size are unchanged. The reference sheet is labeled ’83 Silverado; check both wheel openings, body ends, panel heights and each center piece against your exact casting.

Print at Actual Size / 100%

1. Open the PDF itself, not a screenshot or listing image.
2. Select the paper actually loaded in your printer, such as US Letter or A4, and choose Actual Size / 100%.
3. Disable Fit to Page, Shrink to Fit and borderless enlargement. The artwork is intentionally smaller than the paper. Keep it at its supplied size.
4. Print on ordinary paper and test each cut-out before using waterslide paper. Do not stretch width and height separately to force alignment.

Paper, white artwork and body color

Ordinary home color printers do not print opaque white. Clear film shows the paint beneath white areas. Plan for a suitable white-painted base, white decal film or white-ink process. White film remains visible wherever it is not trimmed away.

Choose waterslide paper explicitly compatible with your printer. Follow its exact printable-side, drying, sealing, soaking and transfer instructions. Mirror only when required by that paper’s transfer method. No-spray instructions are paper-specific and do not guarantee every printer and ink combination.

Apply and finish

Test the ink, paper and paint combination on a spare surface. Apply to clean, smooth, fully cured paint. Support wet film while positioning it, gently remove trapped water and air, and allow the paper manufacturer’s drying time. Test softeners and final clear finishes separately before using them on the model.

Help and supplies

Ink bleeds: check paper, drying and sealing. White disappears: check film and body color. Openings miss: check print scaling and panel geometry.

Read the complete waterslide printing, application, supplies and troubleshooting guide.

Photo-derived raster artwork in a PDF; not an editable vector or cutting-machine file. Fine detail and color are limited by the source photograph.

Print scale check

Download the separate 50 mm calibration page. Print it at Actual Size / 100% with Fit to Page disabled, then measure between the two end ticks. Test the decal artwork on plain paper against your exact casting before printing on waterslide paper.

Recommended decal paper, tools and application supplies