Hot Wheels ’67 Camaro (1999 El Paso Cop Rods): Casting Info & Complete Collector’s Guide

Identify the El Paso police Camaro

The model uses the first-generation ’67 Camaro coupe body. Its pearl-white sides contrast with a black hood, roof and trunk. Blue stripes cross the upper panels and sweep along the sides, tapering toward the nose. An orange-and-yellow shield on each door reads Police, El Paso, Texas.

The number 12 appears on the rear quarter and roof. Small Dedicated to Serve lettering runs below the door graphics and appears on the hood; the trunk carries El Paso Police lettering. These features are more useful for identification than the broad description black-and-white police car.

The front of the original card pairs the name ’67 Camaro with reference 23442 and El Paso, TX Police Dept. Its large illustration is a different, older-style police car used as package artwork. Identify the casting from the model inside the blister and its printed name, not that illustration.

Match the release before comparing examples

South Texas Diecast identifies this combination as the 1999 Cop Rods Series 1 release and records a black Malaysia base. The underside photo here confirms the black finish and molded 1967 CAMARO name. Its small country lettering is too dark to read confidently, so the cataloged country should be checked directly on any loose specimen.

A Camaro Z28 from a later Cop Rods range is a different casting and release. The police theme alone does not make it a variation of this 23442 car. Likewise, wheel changes or replacement parts on a loose example do not establish a factory variation without further evidence.

Paint, wheels, hood and underside

The separate hood panel has a visible seam and a slightly raised leading edge in the featured car. Check fit and hinge condition on a loose example without forcing the hood. Examine black panel edges and the pearl-white wheel arches for paint loss.

The five-spoke faces have a bright finish against black tires. Compare all four wheels, looking for wear, mismatched finishes and bent axles. The top view is particularly useful for checking the roof number, blue stripes and lettering, but the blister creates a bright reflection across the model.

The underside is black, including the molded exhaust detail. The 1967 CAMARO name is visible, while the finer lettering is faint. This photo does not justify a confident transcription of every base mark. The dark glazing and packaging also limit the view of the cabin; an interior color is not assigned from these images.

The rear-angle reference shows red-and-white taillight details. On a loose car, compare the tail panel, door shields and small lettering carefully: rubbing can remove printed detail while leaving the surrounding paint intact.

The 23442 Cop Rods blister card

The black, red and blue front carries the large Cop Rods title, an El Paso badge illustration and reference 23442 at the upper left. The Camaro sits in a clear blister above its model name. The package contains one car.

The reverse carries code 23442-0910, a 1999 Mattel copyright and UPC 074299234347. Its checklist names the ’67 Camaro under El Paso, TX among sixteen department-themed models. The checklist is a guide to other separately sold cars, not the contents of this package or a production total.

The country statement on the back lists China, Malaysia or Thailand as marked. That is generic packaging text; the individual car’s base is the appropriate place to check its manufacturing country. The card’s 1999 copyright is consistent with the cataloged release year.

When comparing sealed examples, inspect the hanging tab, card corners and blister bond. The featured package has visible edge wear and plastic reflections. Keep those condition differences separate from differences in the car’s paint or wheels.