Diecast Model Guides
IXO Ed Carpenter #33 IND64053: 2026 Slim Fast IndyCar Guide
IXO IND64053 recreates Ed Carpenter Racing’s #33 Dallara IndyCar in the red-and-blue Slim Fast livery used for the 2026 NTT IndyCar Series. The 1:64 model is configured for road courses, with the wing package and aerodynamic surfaces that distinguish it from a low-downforce oval version.
The driver, number, sponsor and configuration all belong to the exact identity. Match Ed Carpenter, #33, Slim Fast, road-course configuration and item IND64053.
IND64053 at a glance
- Maker: IXO America / IXO Models
- Series represented: 2026 NTT IndyCar Series
- Team: Ed Carpenter Racing
- Driver: Ed Carpenter
- Car number: 33
- Primary livery: Slim Fast, red and blue
- Chassis: Dallara IndyCar
- Configuration: Road course
- Scale: 1:64
- Tires: Rubber Firestone-style racing tires
- Approximate length: 3 inches
- Packaging: Collector blister/display package
- Manufacturer item: IND64053
Road-course configuration versus oval configuration
IndyCar teams change aerodynamic packages for different tracks. A road-course model carries a more substantial front and rear wing arrangement than an Indianapolis-style superspeedway car. That difference is visible even at 1:64 and is one of the main reasons to preserve the full product title.
When comparing another #33 model, inspect the wing shapes, endplates and bodywork around the wheels. A shared driver and sponsor do not make an oval and road-course model the same release.
Reading the 2026 Slim Fast livery
The livery uses strong red-and-blue areas with sponsor and team markings across a very narrow body. A top or high three-quarter view shows the cockpit surround and engine cover, while a side view makes the #33 and sponsor placement easier to read.
Use a pale or neutral display base so the exposed suspension and dark tires do not disappear. Avoid a busy printed backdrop that competes with the small sponsor graphics.
Handling exposed IndyCar details
An open-wheel car has more vulnerable edges than a closed-body diecast. The front wing, rear wing, suspension arms, mirrors and cockpit surround can be damaged by sideways pressure.
- Lift the model beneath the central body or base rather than by a wing.
- Do not squeeze the exposed wheels toward the sidepods.
- Keep brushes away from suspension arms when dusting.
- Do not attempt to open body panels; no opening features are identified.
- Retain the blister or display package for protected storage.
Building a compact IndyCar display
A three-inch model fits comfortably in a small case, but the exposed wheels need side clearance. Line up multiple cars by nose or rear axle rather than pressing tires against neighboring models.
For a 2026 grid display, place the #33 beside other road-course cars in the same scale. For an Ed Carpenter collection, label IND64053 separately from any 1:18 version or oval-configured model.
Arrival checklist
- Confirm item IND64053.
- Match Ed Carpenter, #33 and Slim Fast branding.
- Verify that the package identifies the 2026 road-course configuration.
- Inspect front and rear wings, suspension and mirrors through the blister.
- Check the rubber tires for even seating on the wheels.
- If removed, set the model on a level surface and confirm all four tires touch.
- Save the complete package and one clear top-view photograph.
Who this model suits
IND64053 is a strong fit for Ed Carpenter Racing fans, modern IndyCar collectors, 2026 grid builders and buyers who want a compact officially licensed racing model. It is especially useful when road-course and oval configurations are cataloged separately.
Final identification check
The exact release is the IXO 1:64 Ed Carpenter Racing #33 Slim Fast Dallara in 2026 road-course configuration, item IND64053.
View the IXO Ed Carpenter #33 IND64053
Explore more IXO models, IndyCar diecast and 1:64 racing cars and accessories.
