American Diorama Gentlemen’s Club Figure 4 24804: 1:24 Scene Guide

American Diorama 24804 is Gentlemen’s Club Figure 4, a hand-painted business-attired figure made for 1:24-scale displays. The fixed-pose polyresin figure stands approximately 8 cm, or just over three inches, tall and arrives in an individual blister pack.

This listing contains one figure only. Vehicles, buildings, furniture and other figures shown in contextual photography are not included. Use item 24804, UPC 685457083426, the gray-and-black clothing treatment and the exact pose in the two product images to separate Figure 4 from the other five members of the Gentlemen’s Club series.

American Diorama 24804 at a glance

• Manufacturer: American Diorama
• Series: Gentlemen’s Club
• Figure: Number 4
• Scale: 1:24
• Subject: Business-attired male figure
• Color treatment: Gray and black
• Material: Hand-painted polyresin
• Pose: Fixed; not articulated
• Approximate height: 8 cm / about 3.15 inches
• Packaging: Individual blister pack
• Package contents: One figure only
• Vehicle included: No
• Manufacturer item: 24804 / AD-24804
• UPC: 685457083426

Why the figure’s posture should determine the scene

A fixed figure becomes convincing when its body direction, head angle and hand position make sense within the display. Begin with the figure rather than placing it last. Set 24804 on the intended base, identify the direction the pose appears to face, and position the car or other subject inside that line of attention.

A figure that appears to address a vehicle, another person or a showroom audience gives the scene a purpose. The same figure placed against an empty wall or facing away from every subject can make an otherwise accurate diorama look accidental.

Four useful 1:24 display roles

Dealership or showroom representative

Place Figure 4 beside the front fender or driver’s door of a featured car. Leave enough space that the figure does not touch the paint or block the wheel design. A small sign, desk or display platform can establish a sales or presentation setting without requiring a full building.

Car-meet participant

Use the figure near a group of parked 1:24 cars or facing another Gentlemen’s Club figure. Two people should share a clear focal point—a car, an open hood or each other—rather than standing in parallel with no visual connection.

Garage owner or collector

Position the figure near a tool cabinet, lift, workbench or covered vehicle. A business-attired figure can suggest the owner of a specialist shop or private collection, adding a different character from a mechanic in work clothes.

Concours or vehicle-reveal host

Place 24804 slightly behind the car so the model remains the main subject. A neutral backdrop, rope barrier or small placard can turn a shelf into an organized event scene.

Matching 1:24 scale correctly

At approximately 8 cm tall, the figure is designed for 1:24 cars, buildings and accessories. A 1:18 car will generally look too large beside it, while a 1:32 vehicle can appear undersized. Physical measurements are more reliable than judging scale from package photography.

Scale also affects furniture, doors and barriers. A desk, chair or garage entrance made for a different scale can make the figure appear unusually tall or short even when the car is correct. Test all major components together before permanently attaching scenery.

Using Figure 4 with the complete Gentlemen’s Club set

Gentlemen’s Club contains six individually packaged figures, numbered 1 through 6. Figure 4 can stand alone, but a group creates more complex scenes such as a board meeting, collectors’ gathering, private auction or showroom launch.

• Keep each figure’s item number with its blister package.
• Vary the spacing and facing direction so the group does not look like a straight lineup.
• Build small conversational groups of two or three figures.
• Leave an open path around the featured vehicle.
• Use the product images to avoid buying a duplicate pose under a shortened title.

Protecting the hand-painted polyresin finish

Polyresin holds fine clothing and facial detail but can chip if dropped. The paint can also rub where the figure contacts a vehicle or rough base. Handle it over a padded work surface and use the strongest central parts of the figure rather than small hands, fingers or clothing edges.

• Lift the figure by the torso and legs.
• Do not bend arms, hands or feet; the pose is not articulated.
• Use a soft brush or low-pressure air for dust.
• Keep the figure away from direct sunlight and hot lamps.
• Leave a small gap between the figure and painted vehicle surfaces.
• Retain the blister for storage and transport.

Keeping the figure stable

Test the feet on a flat surface before adding scenery. If the figure needs extra support, use a small amount of removable museum putty beneath the feet after testing it on the display base. Removable mounting allows the scene to change without grinding, drilling or permanently altering the figure.

Do not reshape the feet to compensate for an uneven base until the base itself has been checked. Loose gravel, thick flocking or warped plastic can make a properly cast figure appear unstable.

How to confirm the exact Figure 4 release

1. Read the item number. The blister should identify 24804 or AD-24804.
2. Check the series. Look for Gentlemen’s Club wording.
3. Match the number. The package should identify Figure 4.
4. Verify the scale. It should be labeled for 1:24 displays.
5. Compare the pose. Use both Muncle Mikes product images.
6. Match the color treatment. Retail records identify the figure in gray and black.
7. Use the barcode. UPC 685457083426 provides another exact cross-check.

Arrival checklist

1. Confirm item 24804 and UPC 685457083426.
2. Verify Gentlemen’s Club Figure 4 and 1:24 scale.
3. Confirm that the package contains one figure and no vehicle.
4. Inspect the blister, card and package seal.
5. Check the face, hands, clothing edges and feet through the blister.
6. Compare the gray-and-black paint and fixed pose with the product images.
7. Place the figure on a level surface and confirm a stable stance.
8. Photograph the front, side and rear before permanent display.

Who should choose this figure

American Diorama 24804 is a strong fit for 1:24 showrooms, car meets, private garages, concours scenes and collectors who want a ready-painted business figure without assembling or painting a kit. It also works as one member of the full six-figure Gentlemen’s Club group.

Final identification check

The exact release is American Diorama Gentlemen’s Club Figure 4, an approximately 8 cm hand-painted gray-and-black polyresin business figure for 1:24 displays, supplied alone in a blister pack, UPC 685457083426 and manufacturer item 24804.

View American Diorama Gentlemen’s Club Figure 4

Explore more American Diorama figures and accessories, 1:24 cars, trucks and model kits, and diecast models and collectibles.