AUTOart Toyota Century GRMN 78763: Black 1:18 Guide

AUTOart item 78763 is a 1:18 composite model of the black right-hand-drive Toyota Century GRMN shown publicly at the 2019 Tokyo Auto Salon. The model combines an ABS-composite exterior with a metal structural chassis, opening hood, four opening doors, opening trunk, positionable front wheels, rubber tires, fabric-textured seats, and carpeted cabin and luggage compartment.

Three dates must remain separate. Toyota launched the third-generation Century in 2018. The black GRMN appeared publicly in 2019. AUTOart’s black 1:18 model reached retailers in 2022. None of those dates supports the false “2026 model year” used by the old generic article. The permanent miniature identifiers are manufacturer item 78763, store SKU F977-78763, and UPC 674110787634.

AUTOart 78763 at a glance

• Manufacturer: AUTOart
• Vehicle represented: Toyota Century GRMN
• Full-size presentation: Black GRMN shown at the 2019 Tokyo Auto Salon
• Driver position: Right-hand drive
• Finish: Black with red GRMN accent details
• Scale: 1:18
• Construction: ABS-composite body with diecast metal structural components
• Opening features: Hood, four doors, and trunk
• Interior: Fabric-textured seats and carpeted cabin
• Trunk: Carpeted luggage compartment
• Steering: Positionable front wheels
• Tires: Rubber
• Approximate dimensions: 11.5 × 4.75 × 3.25 inches
• Collector age: 14+
• Manufacturer item: 78763
• Store SKU: F977-78763
• UPC: 674110787634

2018 Century, 2019 black GRMN, 2022 AUTOart release

Toyota introduced the third-generation Century in June 2018 as its chauffeur-driven flagship for the Japanese market. The production Century combined conservative formal styling, a hand-finished cabin, and a 5.0-liter V8 hybrid powertrain.

A white GRMN-modified Century was seen first, associated with Toyota president Akio Toyoda. The black car followed as a public display at the 2019 Tokyo Auto Salon. Contemporary reporting described it as another one-off GRMN interpretation rather than a regular showroom trim. Toyota did not announce a retail production program or publish a complete technical specification for the GRMN Century.

AUTOart item 78763 reproduces the black show car. Retail release records place the miniature in March 2022. A precise catalog entry can therefore read: AUTOart 78763 Toyota Century GRMN, black, right-hand drive, 1:18 composite model, released 2022, representing the black 2019 GRMN show car based on the 2018-generation Century.

Why the black GRMN is not a normal Century trim

The GRMN treatment changes the visual character of Toyota’s formal limousine without turning it into a publicly sold production model. Compared with a standard Century, the black car uses sportier lower bodywork, a more aggressive grille and bumper treatment, GR-branded accents, distinctive wheels, red pinstriping, and a lower, more purposeful stance.

Those changes should be treated as the identity of one documented show car, not as a universal option package available on every Century. Avoid inventing horsepower, suspension rates, transmission changes, production totals, or Nürburgring performance. Public reporting did not establish a complete mechanical specification for the black GRMN.

The model’s visual evidence is stronger than speculative engineering claims. Match the black paint, red accent line, grille treatment, wheel design, right-hand-drive cabin, plate presentation, and GRMN badging to the exact AUTOart release.

The 18-67 plate detail

The black GRMN is commonly photographed with the Japanese-style number 18-67. Contemporary coverage linked that number to 1867, the birth year of Toyota group founder Sakichi Toyoda. AUTOart includes the plate detail as part of the show-car identity.

The plate is a useful comparison point, but it should not replace the manufacturer item. Small plate graphics can also be difficult to read through packaging or in low-resolution photographs. Use 78763, the black GRMN body treatment, right-hand-drive interior, and UPC together.

How to confirm the exact AUTOart 78763 release

1. Read the item number. The box or seller record should identify 78763.
2. Match the UPC. The exact barcode is 674110787634.
3. Verify the vehicle. The subject is the Toyota Century GRMN, not a standard Century.
4. Check the finish. Item 78763 is black with red GRMN accent details.
5. Confirm the cabin orientation. The steering wheel is on the right.
6. Match the scale. This is the 1:18 composite release.
7. Check the opening panels. The hood, all four doors, and trunk should open.
8. Inspect the interior. Look for fabric-textured seating and carpeted cabin and trunk surfaces.
9. Check the steering and tires. The front wheels are positionable and the tires are rubber.
10. Compare the exact image. Muncle Mikes currently has one exact product image for item 78763.

78763 versus 78762 and 78764

AUTOart’s nearby Century releases can look similar in search results, but each owns a different exact-product intent.

• 78762: Standard Toyota Century in black, without the GRMN show-car body treatment.
• 78763: Toyota Century GRMN in black, right-hand drive.
• 78764: Toyota Century GRMN in pearl white, right-hand drive.

Do not treat the white GRMN as a color option selected from the same product page unless the exact seller offers variants under one record. AUTOart assigned separate manufacturer items. The standard black Century also requires its own product and article because its grille, bumpers, wheels, badges, and historical identity differ.

AUTOart composite construction

AUTOart’s composite models use a molded ABS exterior shell supported by metal structural components. This approach allows thinner pillars, sharper shut lines, and more precisely shaped openings than a body made entirely from thick diecast metal, while retaining weight and rigidity through the inner structure.

“Composite” does not mean fragile plastic toy construction, but the materials respond differently from a full-metal body. Avoid strong solvents, high heat, and twisting force. The exterior shell, mirrors, trim, hinges, grille, and glazing should be handled as precision display components.

• Lift the car beneath the chassis with both hands.
• Do not carry it by the roof, doors, hood, or trunk lid.
• Keep hard metal objects away from the black finish.
• Return the model to its fitted packaging for transport.

Opening the hood

The hood opens to reveal the detailed engine compartment. The production Century platform used a 5.0-liter V8 hybrid system, but the exact GRMN mechanical specification was not publicly documented. Describe the miniature as a detailed representation of the Century engine bay rather than assigning unsupported performance modifications.

1. Place the model on a level, padded surface.
2. Support the chassis near the front axle.
3. Lift from the intended hood edge without pressing on the grille or windshield.
4. Stop at the natural hinge limit.
5. Keep tools, liquids, and loose parts out of the engine bay.
6. Close the hood before moving or repacking the model.

Using the four opening doors

All four doors open, allowing the front and rear cabin to be viewed independently. This is especially important on a Century because the full-size vehicle’s identity centers on rear-passenger comfort as much as the driver’s area.

• Open one door at a time.
• Support the chassis rather than pulling against the opposite side.
• Use the intended door edge, not the mirror or window frame.
• Stop at the natural hinge limit.
• Close every door before lifting the model.

An all-doors-open display needs substantially more than the listed 4.75-inch closed width. Measure the chosen pose before ordering a fitted acrylic case.

Opening the trunk

The trunk opens to reveal a carpeted luggage compartment. Lift the lid from its intended edge and keep pressure away from the rear glass, lamps, and fine trim.

Do not store loose accessories in the trunk. A small item can rub the carpet, jam the hinge, or become trapped when the lid is closed. The luggage space is a display detail, not a storage compartment.

Fabric-textured seats and carpeted surfaces

Textile-like seat surfaces and carpeting give item 78763 a more realistic interior than a uniformly molded plastic cabin. They also collect dust and fibers more readily.

• Use a clean, soft brush for loose dust.
• Do not use liquid upholstery cleaner.
• Keep fingers, adhesive, and display putty away from the fabric.
• Do not place loose objects on the seats or carpet.
• Close the doors and trunk when the model is not being inspected.

Use bright, indirect light to inspect the dashboard, rear seating area, door panels, controls, and right-hand-drive layout. Avoid pressing a flashlight against the glazing.

Positionable front wheels and rubber tires

The front wheels can be positioned to change the display angle. Move them gently and evenly rather than forcing one wheel beyond the steering linkage’s natural range.

• Support the car beneath the chassis.
• Adjust both front wheels with minimal pressure.
• Do not use the steering wheel as a lever.
• Keep rubber tires away from soft vinyl, uncured paint, and adhesive residue.
• Do not apply tire shine, oil, or household cleaner.
• Check that each tire remains centered on its wheel.

No functional suspension, motorized drive, lighting, or sound system is identified. The steering is a display feature, not a remote-control mechanism.

Protecting the black finish

Gloss black reveals fingerprints, dust, fine scratches, and polishing differences quickly. Minimal handling is the safest care plan.

• Handle the underside with clean, dry hands.
• Use a blower or very soft brush for dust.
• Avoid alcohol, adhesive remover, automotive wax, and abrasive polish.
• Do not repeatedly rub one fingerprint spot.
• Use broad, diffused light for photography.
• Keep the model out of prolonged direct sunlight and high heat.

If a fingerprint remains, blot lightly with a clean microfiber cloth rather than polishing the panel until its gloss differs from neighboring surfaces.

Planning the 1:18 display footprint

Exact product records list the model at approximately 11.5 inches long, 4.75 inches wide, and 3.25 inches high with every panel closed. The opening hood, four doors, and trunk dramatically increase the required space.

• Use a case’s internal measurements.
• Add side clearance for four open doors.
• Add height for the hood and trunk lid.
• Leave room beyond the front and rear bumpers.
• Keep finger access beneath the chassis.
• Measure the retail box separately for packaged display.

A large formal sedan occupies more shelf length than many 1:18 sports cars. Do not choose a case from scale alone.

Packaging and completeness

A complete item 78763 presentation should include the model, fitted inner supports, protective wrapping, and AUTOart color box. No loose driver figure, removable luggage, battery, transmitter, or display stand is identified.

• Inspect the outer box corners and printing.
• Check the inner supports for crushing or pressure marks.
• Confirm that mirrors, hood ornament, grille, door handles, and trim remain clear of the packaging.
• Keep item 78763 and UPC 674110787634 legible.
• Retain every insert for future transport.

Package condition and model condition should be documented separately.

Arrival checklist

1. Confirm manufacturer item 78763.
2. Match UPC 674110787634.
3. Verify the black Toyota Century GRMN and right-hand-drive cabin.
4. Compare the car with the exact Muncle Mikes image.
5. Inspect the black finish, red accents, grille, wheels, plate, badges, mirrors, and glazing.
6. Open the hood, four doors, and trunk one at a time.
7. Confirm that every panel closes flush.
8. Inspect the fabric-textured seats and carpeted cabin and trunk.
9. Check the steering movement and rubber tire fit.
10. Inspect the box, inner supports, and product label.
11. Photograph all sides, engine bay, cabin, trunk, underside, box, and barcode.

Who should choose this release

AUTOart 78763 is a strong fit for Toyota Century collectors, Japanese flagship-sedan displays, Akio Toyoda and GRMN-themed collections, black 1:18 model lineups, and collectors who value extensive opening features and textile interior detail. Its exact appeal comes from the one-off black GRMN identity, right-hand-drive configuration, composite construction, and manufacturer item—not from an invented production count or unsupported performance specification.

Final identification check

The exact release is the AUTOart 1:18 Toyota Century GRMN in black with a right-hand-drive interior, manufacturer item 78763. It represents the black GRMN show car seen at the 2019 Tokyo Auto Salon and was released as a miniature in 2022. The model uses composite and metal construction, opens at the hood, all four doors, and trunk, includes fabric-textured seats and carpeted cabin and luggage areas, has positionable front wheels and rubber tires, and measures approximately 11.5 × 4.75 × 3.25 inches. Permanent identifiers are store SKU F977-78763 and UPC 674110787634.

View the AUTOart Toyota Century GRMN 78763

Explore more AUTOart models and collectibles, Toyota diecast models, 1:18 cars, models, and diorama accessories, and diecast and scale-model cars.