Diecast Model Guides
Solido Williams FW47 S1818802: Carlos Sainz Australian GP Guide
Solido item S1818802 represents Carlos Sainz’s number 55 Williams FW47 from the 2025 Australian Grand Prix at 1:18 scale. The finished Competition-series model combines diecast metal with plastic detail parts, real rubber tires, rolling and steerable wheels, exposed double-wishbone suspension, a multi-element front wing, a full rear wing, a fixed body and a driver figure in the cockpit.
This is the Australian Grand Prix release from Sainz’s first race weekend with Atlassian Williams Racing. It is not the later Azerbaijan Grand Prix podium version. Match manufacturer item S1818802, car number 55, the Melbourne-specification blue-and-black livery and package EAN 3663506046414. The Shopify record stores the shortened barcode 663506046414.
Solido S1818802 at a glance
- Manufacturer: Solido
- Series: Competition
- Vehicle represented: Williams FW47 Formula One car
- Driver: Carlos Sainz
- Car number: 55
- Team: Atlassian Williams Racing
- Event: 2025 Australian Grand Prix, Melbourne
- Scale: 1:18
- Construction: Diecast metal with plastic detail parts
- Tires: Real rubber racing slicks
- Wheels: Rolling and steerable
- Suspension: Exposed double-wishbone representation
- Opening panels: None
- Cockpit: Driver figure included in the seat
- Display: Plastic base in a windowed paper box
- Accessories: None identified beyond the base and packaging
- Approximate dimensions: One complete exact-item record lists 31.6 × 11.1 × 5.6 cm
- Manufacturer item: S1818802
- EAN: 3663506046414
Why the Australian Grand Prix identity matters
The 2025 Australian Grand Prix was Sainz’s first race weekend as a Williams driver after moving from Ferrari. He qualified tenth in his first Williams qualifying session, while teammate Alex Albon started sixth. The race itself was wet and chaotic, and Sainz retired early after losing the car at the final corner under the first Safety Car.
That makes S1818802 a debut-weekend model rather than a podium celebration. The release preserves the first-race Williams livery, driver number and Melbourne context. It should not be described as the car from Sainz’s later 2025 podium in Azerbaijan.
How to confirm the exact S1818802 release
- Read the item number. The box or base should identify S1818802.
- Check the driver. The cockpit and package should identify Carlos Sainz.
- Confirm the number. The car carries number 55.
- Match the event. The release is the 2025 Australian Grand Prix specification.
- Verify the scale. The model is 1:18.
- Inspect the livery. Match the Atlassian Williams Racing blue-and-black graphics and sponsor layout.
- Check the format. The body is fixed, with no opening panels.
- Compare the usable product images. Review the front, side, rear, cockpit, wings and package before ordering.
- Record the printed EAN. The full package code is commonly listed as 3663506046414.
Do not confuse S1818802 with the Azerbaijan S1818803
Solido also catalogs a Carlos Sainz Williams FW47 from the 2025 Azerbaijan Grand Prix under item S1818803. That later event was Sainz’s first podium for Williams, and the race-specific graphics and story are different.
Use the complete record for this model: Solido S1818802 / Williams FW47 #55 / Carlos Sainz / Australian GP 2025 / 1:18. A shortened “Sainz Williams FW47” title is not enough for duplicate control.
The fixed body has no opening panels
The FW47 body, engine cover, nose and cockpit surround are fixed. Do not insert a blade, fingernail or tool into a visible seam. Formula One bodywork at this scale contains thin edges and exposed aerodynamic parts that can be damaged by prying.
The fixed construction keeps the nose, floor, sidepods and rear body aligned. The model’s display value comes from its race-specific livery, cockpit, suspension and wings rather than opening compartments.
Steerable wheels and rolling display
Exact S1818802 records identify rolling and steerable wheels. Use the steering only for a modest display angle while the model rests on a clean, level surface.
- Support the chassis near the front suspension.
- Move both front wheels together with light pressure.
- Stop if one wheel or tie point resists.
- Do not roll the car over rough scenery or carpet.
- Return the wheels nearly straight before repacking.
The mechanism is intended for positioning, not repeated play. Never pull the model by a wheel.
Real rubber tire care
The racing slicks are made from rubber and should rest on a nonreactive surface during long-term display. Glass, acrylic or fully cured sealed wood are safer than soft vinyl, fresh paint or adhesive-backed material.
- Check that every tire sits evenly on its wheel.
- Do not apply tire shine, oil or household cleaner.
- Lift and reposition the model instead of dragging it sideways.
- Keep the tires away from direct heat.
- Inspect the stance periodically if the car remains loose.
Protecting the multi-element front wing
The front wing is one of the most vulnerable parts of a modern Formula One model. S1818802 reproduces the layered wing structure and narrow nose, so even light sideways pressure can damage an endplate or flap.
- Lift beneath the chassis, not beneath the front wing.
- Keep fingers away from the wing tips.
- Do not use the nose as a handle.
- Leave extra clearance at the front of the display case.
- Lower the car vertically into its packaging rather than sliding it forward.
Exposed double-wishbone suspension
The front and rear suspension arms are visible, as they are on the full-size FW47. Their thin shape adds realism but also creates several delicate contact points.
When inspecting the underside, support the center of the floor in a padded cradle. Do not rest the model on a suspension arm, wing, mirror or tire edge. If a wheel appears misaligned on arrival, document it before attempting any adjustment.
Rear wing, floor and bodywork care
The full rear wing and sculpted bodywork complete the Formula One silhouette. Use a rear three-quarter angle to inspect the wing planes, engine cover, floor edges and sponsor graphics.
Do not press on the rear wing to lift the car. Keep brushes from catching beneath the wing or around the diffuser. Low-pressure air is safer than wiping across exposed aerodynamic parts.
Cockpit and driver figure
Exact product records identify a driver figure in the cockpit. The figure, helmet colors and surrounding halo help establish the Sainz identity, but the cockpit is fixed and should not be disassembled.
- Do not press on the halo.
- Keep liquid cleaner away from the helmet and cockpit graphics.
- Use a fine brush for loose dust.
- View the cockpit from slightly above rather than forcing access.
- Photograph the helmet and number markings when the model arrives.
Atlassian Williams Racing livery
The blue-and-black Williams finish and event-specific sponsor arrangement are central to the model. Compare the nose, sidepods, engine cover, front wing, rear wing and wheel-area graphics with the exact product images.
Sponsor layouts can change during a season. A model from another Grand Prix can share the same chassis and driver while carrying different small markings. Item number and event should remain attached to the livery record.
Australian GP context without overstating the result
Sainz showed early pace in Melbourne, finishing second in the first practice session and reaching Q3, where he qualified tenth. The wet race ended early for him after a Turn 16 incident under the Safety Car.
The model therefore represents a significant team debut, not a finishing result to celebrate. Do not describe S1818802 as a race winner or podium car. Sainz’s 2025 Williams podium belongs to the later Azerbaijan event.
Dimension conflict and display planning
A detailed exact-item record lists the model at approximately 31.6 cm long, 11.1 cm wide and 5.6 cm high. Another dealer lists a shorter approximate length of 25 cm. The larger figure is more consistent with a modern Formula One car at true 1:18 scale, but the received model should be measured before buying a fitted case.
- Measure from the front wing to the rear wing.
- Include the widest wing and tire points.
- Leave clearance for steering the front wheels.
- Measure the plastic display base separately.
- Use the case’s internal dimensions, not the outside box size.
Using the plastic display base
The model is packaged on a plastic base inside a windowed paper box. The base keeps the long car supported and preserves the item identity.
If the car is removed, save every screw, spacer and support in a labeled bag. Do not lift the base by the model. Before transport, secure the car to the base and return the complete assembly to the fitted box.
Boxed display versus loose display
Window-box display
The box protects the wings, suspension and cockpit while keeping the event and item number visible. Position it away from glare so the blue-and-black livery remains clear.
Loose display
A loose display gives a better view of the suspension, floor, cockpit and wing detail. Photograph the packaged model first, retain the base and hardware, and use a covered case to reduce dust.
Arrival checklist
- Confirm manufacturer item S1818802.
- Match EAN 3663506046414 on the package when present.
- Verify Williams FW47, Carlos Sainz, number 55 and 2025 Australian Grand Prix.
- Confirm the 1:18 scale and Atlassian Williams Racing livery.
- Inspect the window box, base and mounting hardware.
- Check the front wing, nose, mirrors, halo, suspension, floor and rear wing.
- Confirm the driver figure is seated in the cockpit.
- Set the model on a level surface and inspect the tire contact.
- Test the steering with only a modest angle.
- Do not attempt to open the body or cockpit.
- Photograph both sides, front, rear, top, underside, base and package labels.
Who should choose this release
Solido S1818802 is a strong fit for Carlos Sainz collectors, Williams Racing displays, 2025 season lineups and buyers who want a large 1:18 Formula One model with visible suspension and steerable wheels. Its Australian Grand Prix identity makes it especially relevant as Sainz’s first Williams race-weekend release.
Final identification check
The exact release is the Solido Competition 1:18 Williams FW47 number 55 driven by Carlos Sainz at the 2025 Australian Grand Prix. It has diecast-and-plastic construction, real rubber tires, rolling and steerable wheels, exposed double-wishbone suspension, multi-element front wing, full rear wing, fixed body with no openings, driver figure, plastic display base, manufacturer item S1818802 and package EAN 3663506046414.
View the Solido Williams FW47 Carlos Sainz S1818802
Explore more Solido models and collectibles, 1:18 cars and diorama accessories, and diecast and scale-model cars.
