Dodge Challenger Drift Car DIY Hot Wheels Kit Guide

Use this Dodge Challenger Drift Car DIY Hot Wheels kit guide to plan paint, assembly, and wheel fit before customizing the casting. Muncle Mikes supplies a stripped Hot Wheels model prepared for paint, detailing, and reassembly. It is a project kit, not a finished custom car. The listed factory wheel-size reference is 10 mm at the front and 12 mm at the rear; custom wheels are sold separately.

Dodge Challenger Drift Car kit details

The kit is based on the Hot Wheels Dodge Challenger Drift Car casting. It arrives stripped and ready for paint. The casting uses a click-together design, and model glue can provide extra hold. The item number is MUNDIDM11569S. Interior, window, and original wheel colors may vary, so review the current product gallery and listing details before ordering.

The product page describes the casting and its preparation. It does not list paint, tools, or custom replacement wheels as included supplies. Check the live listing for the current kit contents and availability, and gather the materials needed for your chosen finish.

Plan around the 10 mm front and 12 mm rear reference

The listed factory wheel-size reference is 10 mm front and 12 mm rear. This records the described original setup; it does not guarantee that every replacement wheel will fit. Compare diameter, wheel width, axle length, inner spacing, and body clearance with the casting before buying parts. Check whether the axles or other hardware you need are included; the listing does not confirm replacement axles.

Dry-fit each component before painting or final assembly. Confirm that the body and base seat properly, then rotate the wheels and check that they clear the fenders and base without rubbing. Keep the front and rear components organized as you work. Test replacement wheels on the casting before applying paint or glue. Custom wheels are sold separately, so verify dimensions and fit for your intended setup.

Choose paint and optional details

The casting is ready for your paint, detailing, and reassembly choices. Decide on a body color and optional graphics before priming. Keep paint clear of glazing edges, wheel openings, seams, and the contact areas between the body and base. Follow directions for the products you choose, including ventilation, curing, and safe handling. Optional 1:64 decal sheets can add details; check their scale and placement because they are not listed as included.

View the Dodge Challenger Drift Car DIY Hot Wheels kit for current details and availability. Browse custom wheels and rubber tires separately after confirming fit for your casting.

Frequently asked questions

Is this a finished custom Challenger?

No. It is a stripped casting prepared for your own paint, detailing, and reassembly.

What wheel sizes are listed?

The factory reference is 10 mm at the front and 12 mm at the rear.

Are custom replacement wheels included?

No. The listing says custom wheels are sold separately.

Will the interior and original wheels match every photo?

They may vary. Review the current product photos and listing details before ordering.