Plastic Model Guides
Tamiya Airbrush Stand III 74564: Organize Two Airbrushes
The Tamiya Spray-Work Airbrush Stand III, item 74564, provides two nonslip holders on a clamp-mounted stand. It gives compatible airbrushes a defined resting place while you prepare paint, change tasks or work with two handpieces. Tamiya lists compatibility with its HG and Airbrush Lite Series products; airbrushes are sold separately.
Start with the bench position
Before ordering, look at where the clamp would attach and how the air hose will reach the holder. Check the clamp's permitted fit in the product instructions against your work surface. A bench edge, trim piece or obstruction can affect access even if there appears to be enough space above the table.
Place the stand where you can reach it without stretching across the model or paint containers. Allow the hose a route that does not pull the airbrush sideways when it is resting. Test the position with an empty, clean airbrush before relying on the arrangement during painting.
Two holders, several ways to work
The two positions can support a pair of compatible airbrushes used for different tasks. They are also useful when one handpiece is being prepared while another is ready for a later stage. Having two positions does not mean you need to buy two airbrushes immediately; plan the bench around the equipment you use.
The stand supports the airbrush rather than the model you are painting. Keep space for a separate model support or workpiece holder when the painting task requires one.
Stand or regulator?
| Item | Function | Separate equipment |
|---|---|---|
| 74564 Airbrush Stand III | Holds two compatible airbrushes | Airbrushes are sold separately |
| 74565 regulator with gauge | Adjusts and filters the air supply | Regulator is a separate purchase and can mount to this stand |
Choose the stand to organize the working position. If you also need air adjustment, evaluate the regulator's connection and pressure requirements separately. Mounting two products together does not make them a single included package.
Frequently asked questions
Are the two airbrushes in the photograph included?
No. Tamiya states that airbrushes are sold separately. The photograph demonstrates the holders in use.
Does it fit every brand of airbrush?
Tamiya lists its HG and Airbrush Lite Series. Check an unlisted airbrush's shape and supported fit instead of assuming universal compatibility.
Can I choose it without measuring the bench edge?
Check the mounting location and the clamp's stated limits first. Use the actual fitting instructions to establish the clamp opening.
Find this Tamiya item
