Diecast Model Guides

Alclad ALC-307: Clean Up Before Your Next Color

Alclad II ALC-307 Airbrush Cleaner bottle labeled 4 fl oz

Alclad II ALC-307 is an airbrush cleaner in a 4 fl oz bottle. Keep it for the cleanup stage of an Alclad painting session. Its label distinguishes it from a paint reducer, which matters when several clear liquids are sitting beside a metallic paint.

Finish the color before starting the cleaning step

Set aside the painted part and secure the paint bottle before handling cleaner. Remove the unused paint as directed, then follow the airbrush and ALC-307 instructions for cleaning the equipment. Keep the fresh cleaner, paint and used cleaning liquid clearly separated.

This separation helps when you return to the next color. Residue from a previous metallic application should not be treated as part of a new mixture. A clean cup is a useful starting point, but the paint passages and other serviceable parts still need the inspection specified by your airbrush manual.

Cleaner and paint reducer are different choices

The ALC-307 label identifies the liquid as cleaner and says it is not a reducer for Alclad. Use the preparation directions for the particular Alclad paint instead of adding cleaner to change its consistency. The name of the paint family also matters: a direction for one finish should not be transferred automatically to every Alclad product.

For example, choosing a metallic color establishes what will go on the model. Choosing ALC-307 establishes a cleanup supply for the equipment. Those decisions support the same session, but they do not make the products interchangeable. Our first-spray guide explains how to keep the paint preparation and test controlled.

Check the equipment before changing materials

Read the cleaner label and your airbrush instructions together. Use the specified ventilation and protection, keep the cleaner away from ignition sources, and use only the cleaning methods suitable for the parts being serviced. Do not assume that a component can be soaked simply because cleaner may be sprayed through the assembled tool.

Once cleaning is complete, inspect and prepare the airbrush for its next use. A test on scrap helps reveal remaining contamination or an irregular spray before the new material reaches the model. If the result is poor, stop and identify the cause; covering it with more paint makes the diagnosis harder.

Plan this check even when the next material looks clear. A transparent finish still deserves clean equipment and its own preparation instructions. Keep the model out of the cleaning area so stray cleaner cannot reach a finish you have just applied.

Alclad II ALC-307 Airbrush Cleaner, 4 fl oz

Alclad II ALC-307 Airbrush Cleaner bottle labeled 4 fl oz

Choose ALC-307 for equipment cleanup and keep the paint preparation instructions beside the actual color or finish.

See this product and current options.

Questions about ALC-307

Can I thin Alclad paint with it?

ALC-307 is labeled as cleaner, not Alclad reducer. Follow the instructions for the actual paint you are using.

Does this listing include paint?

It is one 4 fl oz bottle of airbrush cleaner. Select the color or finishing product separately.

Can I leave the whole airbrush soaking in it?

Follow the equipment manual's component-specific cleaning directions. A cleaner's intended use does not establish that every seal, coating or plastic part can be immersed.

Browse model paints and finishing supplies, or visit the Muncle Mikes Learning Center for related techniques.

More guides for your next project

Use the exact release code, scale, livery, packaging and current product contents instead of relying on a similar model name.