Diecast Model Guides
Remove Acrylic Residue with The Army Painter Airbrush Cleaner

The Army Painter Airbrush Cleaner AW2002P is a water-based cleaning product for acrylic paint residue. The 100 ml bottle belongs to the maintenance part of a painting session. Clean the equipment before judging the next paint mixture, so old residue does not become another variable in the spray test.
Work through the cup, then the rinse
The maker's directions use cleaner in the cup with an old brush, followed by emptying the cup. A small fresh amount is then sprayed through, and water is used for the final rinse. Carry out that sequence with the ventilation, waste handling and equipment precautions specified for your setup.
Emptying the dirty liquid matters: it separates the loosened residue from the fresh cleaning step. Keep that used liquid out of the cleaner bottle and away from your paint. When a color change is planned, inspect the cup and the serviceable parts described in your manual before introducing the next mixture.
Use a brush suitable for the cup and follow the equipment instructions around the needle and nozzle. A general product demonstration does not replace the manual for disassembly or fragile components. If the spray remains irregular, stop and inspect instead of assuming another dose of cleaner will solve every cause.
Decide whether the job is cleaning or paint preparation
Cleaner removes acrylic residue; Airbrush Medium AW2001P combines thinning and flow improvement for compatible paint. They are separate products, both supplied in 100 ml bottles. Read the front label before adding either to the cup.
If the equipment is dirty, establish a clean starting point first. If clean equipment is spraying a fresh mixture poorly, evaluate that mixture and the settings with the paint instructions. Changing cleaner, medium and pressure together makes the result harder to understand.
Check the next color away from the model
After the cleaning and rinse procedure is complete, prepare the equipment for the next material. A small test can reveal unwanted color carried over from the previous mixture. This is especially useful when you move from a strong or dark color to a pale area where contamination would be obvious.
Follow the paint and airbrush directions for the new mixture. The first-spray test guide helps you compare flow and coverage before committing to the model. The aim is a repeatable starting point, not a promise that one cleaner eliminates every maintenance task.
The Army Painter Airbrush Cleaner AW2002P, 100 ml

Choose AW2002P for cleaning acrylic residue. The airbrush and demonstration tools shown in the second image are not included.
Questions about Airbrush Cleaner
Is AW2002P a paint thinner?
It is the cleaning product. Choose the paint's specified medium or thinner for paint preparation.
Can I skip the water rinse?
The Army Painter includes a water rinse in its directions for this cleaner. Follow the complete instructions and the requirements of your equipment.
Does water-based mean spraying needs no precautions?
No. Follow the cleaner, paint and equipment instructions for ventilation and protection. A water-based formula is not permission to inhale cleaning mist.
Browse model paints and finishing supplies, or visit the Muncle Mikes Learning Center for related techniques.

