Hot Wheels How To

10mm Black 5-Spoke Deep-Dish Wheels & Rubber Tires Wheel and Tire Fitment Guide

Front view of four black five-spoke deep-dish wheels with rubber tires

This set contains four black five-spoke deep-dish wheels with fitted black rubber tires, all listed at 10 mm. The matching size can suit a Hot Wheels or Matchbox custom with room for the deeper hubs, but the nominal diameter alone cannot confirm fit. Measure the front and rear wheel openings and axle supports on your own car first.

What this wheel set includes

The product specifies four black five-spoke deep-dish wheels and four fitted black rubber tires. All four wheels are listed at 10 mm, with matching front and rear sizes. The listing does not establish a universal axle span, inner-hub depth or included mounting hardware. Check those details against the original car and confirm anything that must be purchased separately.

On a 1:64 custom, a 10 mm wheel can still rub the fender, chassis or interior if its tire is too wide or the hub sits too far inward. Compare complete tire diameter, installed width, axle length and free movement with the body and base fully seated. Do not assume axle rods shown in a photo are part of the package.

Four black five-spoke deep-dish wheels with fitted black rubber tires
Current product image for the listed wheel/tire components.

Measure and test fit before assembly

Compare the listed size with the intended casting and check wheel or tire width, inner opening, axle length, inner spacing, and body or chassis clearance as applicable. A shared 1:64 scale, brand, or nominal diameter does not guarantee compatibility with every model.

Dry-fit each component before final assembly. Confirm that tires seat evenly on the intended wheels, or that wheels sit at the correct depth on the axle. Rotate the assembly and check for rubbing. If the package does not confirm axle or installation hardware, measure your existing setup and verify what else is needed.

Plan the look and review the package

Use the current product photos to judge the color, tread or spoke appearance, and the number of visible pieces. Review package details and the live listing before purchase. This product is a component set; it is not a completed car unless the listing explicitly says otherwise.

View 10mm Black 5-Spoke Deep-Dish Wheels & Rubber Tires — Set of 4 for current contents. Browse more replacement wheels and rubber tires for related parts.

Frequently asked questions

What size is listed?

All four wheels are listed at 10 mm. Compare the complete tire diameter and hub clearance with your casting before fitting them.

What quantity is included?

Four wheels with four fitted rubber tires. Confirm separately whether your build requires axle hardware.

Are axles included?

Only if the current product listing explicitly confirms them. Check before ordering if your project needs axles.

Will these components fit any 1:64 model?

No universal fit is stated. Compare dimensions and clearance with the exact casting.

For closed-body modifications, consult the no-drill Hot Wheels wheel-swap guide. If a fitted tire rubs or an axle shifts, use the wheel-swap troubleshooting guide. Secure both axles and all four wheels before a roll test.