10mm/12mm Gold 5-Spoke Deep-Dish Wheels & Rubber Tires Wheel and Tire Fitment Guide

This set has four gold five-spoke deep-dish wheels with fitted black rubber tires: two listed at 10 mm and two at 12 mm. The larger pair can give a custom diecast car a staggered stance, but it also needs more room at the fenders. Compare both ends of your Hot Wheels or Matchbox car before deciding which wheels go where.

What you get—and what to measure

The current listing specifies four gold wheels with four fitted black rubber tires, in two nominal sizes: 10 mm and 12 mm. It does not confirm a universal axle length, hub depth, or included axle hardware. Check the actual product details and measure tire diameter, wheel width, inner-hub clearance, and axle spacing on your casting before ordering.

Test the 12 mm pair with the body and base in their finished positions. The tire may fit inside the wheel opening but still rub because the hub is too wide or the axle sits off-center. Photos that show axle rods do not establish whether the rods are included; confirm that separately before cutting or removing the original axle.

Measure and test fit before assembly

Compare the listed size with the intended casting and check wheel or tire width, inner opening, axle length, inner spacing, and body or chassis clearance as applicable. A shared 1:64 scale, brand, or nominal diameter does not guarantee compatibility with every model.

Dry-fit each component before final assembly. Confirm that tires seat evenly on the intended wheels, or that wheels sit at the correct depth on the axle. Rotate the assembly and check for rubbing. If the package does not confirm axle or installation hardware, measure your existing setup and verify what else is needed.

Plan the look and review the package

Use the current product photos to judge the color, tread or spoke appearance, and the number of visible pieces. Review package details and the live listing before purchase. This product is a component set; it is not a completed car unless the listing explicitly says otherwise.

View 10mm/12mm Gold 5-Spoke Deep-Dish Wheels & Rubber Tires — Set of 4 for current contents. Browse more replacement wheels and rubber tires for related parts.

Frequently asked questions

What size is listed?

Two wheels are listed at 10 mm and two at 12 mm. Measure the assembled tires and the space in your own casting before fitting them.

What quantity is included?

Four wheels with four fitted rubber tires. Check the listing to confirm whether your project needs separate axle hardware.

Are axles included?

Only if the current product listing explicitly confirms them. Check before ordering if your project needs axles.

Will these components fit any 1:64 model?

No universal fit is stated. Compare dimensions and clearance with the exact casting.

For an accessible axle swap, read the no-drill Hot Wheels wheel-swap guide. If a fitted wheel rubs or wobbles, use the wheel-swap troubleshooting guide. Secure both axles and all four wheels before any roll test.