News
AUTOart 8-Inch Turntables: 98017 vs. 98018 and Model Fit

The confirmed shopping distinction is the top color: AUTOart 98017 is black and 98018 is silver. Both are small, 8-inch rotary display stands, and both require a D-size battery that is not included. Choose the finish after checking the size and weight requirements of the item you intend to display.
Browse AUTOart rotating displays and models

Black top or silver top?
The black-top AUTOart 98017 is a starting point for a darker display base. A pale or brightly colored model can provide contrast against it; for a black model, consider how clearly its tires and lower body will stand apart from the background.
The silver-top AUTOart 98018 offers a lighter base treatment. Choose it when that better separates the model from its surroundings. “Silver top” is not a claim that the surface is a mirror or that it reveals the underside of the car.
Do not pay for one on the assumption that the color change brings a stronger motor or a higher load rating. The verified Muncle Mikes specifications used here do not establish such a difference.
Will your model fit on an 8-inch platform?
The listings identify 1:64, 1:43, 1:32 and 1:24 as relevant model scales. Cars within any one scale still vary in length and width. A long vehicle can be a poor match even when its scale appears in that list.
Draw an 8-inch circle on paper and compare the complete closed-model footprint with it. Include mirrors, wings and protruding bodywork. Then consider the space the model will sweep through as it turns; a nearby wall or neighboring model must remain outside that path.
The 1:43 Bugatti Atlantic, 50947, has an approximate quoted car size of 4.25 × 1.5 inches in plan view. That is a useful small-model example for a footprint check, but size alone does not verify the turntable's permitted load.
When displaying a car in its own showcase, check the showcase's dimensions and total loaded weight—not just the car's. The showcase may occupy considerably more space than the model inside it.

Why this is not a default stand for 1:18
The 1:18 Ford GT, 72945, is listed at approximately 10 inches long. It exceeds the platform's 8-inch diameter. That is a reason to look for a verified larger solution, not to assume overhang is acceptable.
For any expensive or unusually heavy model, obtain the stand's supported load and placement instructions before use. This guide has no verified maximum weight, rotation rate, battery-runtime figure or noise measurement to offer.
Battery and display planning
The 98017 description specifies one 1.5-volt D-size battery, excluded from the package. The 98018 listing also specifies one D battery, excluded. These are not described as USB-powered stands, and a USB cable or mains adapter should not be assumed to be included.
Place the stand on a stable surface and follow its supplied operating instructions. Test clearance with the intended arrangement, keeping opening doors and loose removable parts out of the rotation path. A rotating stand is a presentation accessory, not a protective enclosure.
For covered, stationary display instead, read the AUTOart case-fit guide. Choose the accessory that solves your actual display need before selecting its finish.

