News

GeminiJets An-225 GJADB2336: Opening Nose, Size and Stand Requirements

Representative current product image for GeminiJets An-225 GJADB2336: Opening Nose, Size and Stand Requirements

GeminiJets An-225 GJADB2336 has an opening nose cargo door and a listed wingspan of about 8.75 inches. It takes a sizeable space even at 1:400, and no stand is included. Plan the display around those details before choosing it for a shelf.

This is the Interactive An-225 Mriya in Antonov Airlines markings, registration UR-82060. Keep that full identity with the item number when comparing releases.

Product image: Antonov An-225 Mriya UR-82060 – GeminiJets 1:400
Current referenced product: Antonov An-225 Mriya UR-82060 – GeminiJets 1:400.

See GeminiJets large cargo aircraft

Identify this release before comparing offers

The An-225 GJADB2336 is white with blue and yellow stripes. GJADB2336 identifies this 1:400 Interactive version, rather than every model of the aircraft.

The registration identifies the represented plane, while the code and scale distinguish the miniature. Those details help when avoiding duplicates or choosing a particular release as a gift.

It is a finished diecast model with plastic components and exterior detail. The airline markings are already applied, so this is a display purchase rather than a painting project.

What the opening nose adds

The opening nose gives you another way to present a cargo aircraft. Decide whether that loading-access view is what you want to feature in the scene.

A cargo load, working ramp and powered movement are not specified. Follow the model’s operating instructions and treat only the documented nose door as an opening feature.

If you plan to leave the nose open, confirm the extra clearance before buying an enclosure. The closed fuselage length only covers part of that arrangement.

Product image: GeminiJets Boeing 737-800 American Airlines 100th Anniversary – 1:400
Current referenced product: GeminiJets Boeing 737-800 American Airlines 100th Anniversary – 1:400.

Measure the wingspan first

The catalog gives approximately 8.25 inches in length and 8.75 inches in span. For a side-on display, pay particular attention to shelf depth: the wings extend farther than the fuselage is long.

Try an 8.25-by-8.75-inch paper rectangle in the intended spot as a rough footprint. Leave handling space, then confirm the height and open-nose clearance separately.

The 1:400 American anniversary 737-800 has a listed span of roughly 3.5 inches. Beside the An-225, it shows why two models at 1:400 can need very different amounts of room.

Stand and hangar decisions

For an elevated display, you will need a separately purchased stand confirmed for GJADB2336 and its mounting arrangement. Scale alone is not enough to select the support for this large model.

The GJWBHGR2 hangar is about 9.5 inches wide outside, but the listing does not provide the usable doorway width. Confirm that opening before planning to put the An-225 inside.

The model suits a dedicated large-aircraft shelf or a roomy cargo apron. Settle the space and accessory fit first so the open nose can be part of the arrangement you actually want.

Find the An-225 and compatible display options