Plastic Model Guides

Tamiya HG III 74532: A 0.3 mm Airbrush for General Model Painting

Tamiya 74532 HG III metal airbrush with a top button and paint cup

The Tamiya Spray-Work HG III 74532 is a double-action airbrush with a 0.3 mm nozzle. It is worth comparing when you want one airbrush for several model-painting tasks, from shading and gradients to broader coverage. Start with the work you do most often, then decide whether a more specialized fine-detail model is useful.

What the 0.3 mm specification tells you

The nozzle size identifies this version of the HG III. Tamiya describes uses ranging from fine lines to larger painted areas and gloss work. The specification helps compare equipment, but it does not prescribe one mixture or guarantee a particular finish.

Double action gives you control of air and paint during a pass. Build familiarity with the top button on a test surface: begin with the paint maker's preparation guidance, then assess how a small change in control affects coverage. Work toward the desired result before moving onto a visible model panel.

HG III or HG III Super Fine?

Model Nozzle Reason to compare
HG III 74532 0.3 mm A range of general painting, shading and coverage jobs
HG III Super Fine 74545 0.2 mm Greater emphasis on small details and fine patterns

The Super Fine's smaller nozzle does not make it an automatic upgrade for every project. Consider how much broad coverage you paint, how you prepare the chosen paint and which control response you want to practice. Keep the two models' replacement-part requirements separate.

Paint and air supply

Tamiya lists its acrylic, enamel and lacquer paints for the 74532 and identifies Spray-Work compressors and air cans as air sources. Check the exact hose and connection arrangement for the equipment you have. Select thinner and cleaner for the paint line, rather than treating the three paint families as interchangeable.

Our paint preparation and first-spray guide helps you plan a small trial. Follow the paint label's ventilation instructions and clean the airbrush using its own maintenance procedure when the session is finished.

Frequently asked questions

Which needle fits the HG III 74532?

Tamiya lists replacement needle 10325 for the 74532 and 74537.

Which nozzle is the listed replacement?

The 10327 0.3 mm nozzle lists 74532 among its four supported HG models.

Can I convert it to Super Fine by ordering a smaller nozzle?

Do not assume a nozzle swap makes a supported conversion. The 74545 is a distinct model; use the components specified for the airbrush you own.

Find this Tamiya item

Tamiya 74532 Spray-Work HG III airbrush with top control button and paint cup
The HG III 74532 uses a top control button and 0.3 mm nozzle for a range of model-painting tasks.

Tamiya Spray-Work HG Airbrush III – 74532

View product, price and availability

Model paints and finishing supplies · Hobby Learning Center

Continue planning the model-kit project

Use the guide for identity and planning, then verify the exact kit, tools, paint and included parts before ordering.