Plastic Model Guides

Test a Small Mix with Vallejo Airbrush Thinner 71.361

Vallejo Airbrush Thinner 71.361, 60 ml bottle

Vallejo Airbrush Thinner 71.361 is the 60 ml bottle of thinner used to adjust compatible Vallejo acrylic paint for airbrushing. Begin with a small mixture and a spray test. The useful amount is the amount that suits the paint instructions, the airbrush and the finish you are trying to produce.

Start from the paint, then adjust the mixture

Check the exact paint range before adding anything. A paint already prepared for airbrushing and a thicker paint may need different preparation. The word “acrylic” alone does not give a universal recipe, and a fixed one-to-one mix should not replace the directions for the paint.

Prepare a small quantity in a clean mixing container or as the equipment instructions permit. Mix thoroughly and spray onto a sample prepared like the project. Examine whether the paint forms the line or coverage you want, rather than judging the mixture only by how it looks in the cup.

Thinner, flow improver and cleaner
What you want to change Product role to consider First check
Paint fluidity Airbrush Thinner The paint range and its dilution instructions
Paint drying on the needle Airbrush Flow Improver That the needle is clean and the additive suits the paint
Residual paint in the equipment Airbrush Cleaner The airbrush maker’s cleaning procedure

Make one small adjustment at a time

Vallejo describes thinner as an additive for increasing fluidity and extending paint, with a few drops as a practical starting approach. Add it gradually within the paint instructions, mix again and repeat the same test. Keep the other settings steady while judging that change.

If the paint runs across the sample, stop and reassess the whole application: mixture, distance, airflow and how much paint you are releasing. More thinner is not the answer to every spray problem. If the airbrush spits or stops delivering, inspect it for residue before repeatedly changing the paint.

Keep the stock bottle clean

Dispense the thinner into the working mixture and keep used paint, cleaning liquid and contaminated tools away from the bottle opening. Do not return a leftover mixed batch to the original thinner bottle. A clean stock bottle makes later mixtures easier to reproduce.

Questions before you start

How do I know when the mixture is ready?

Use the same test pattern on a prepared sample and assess the line, coverage and dried finish. The paint should suit the intended job before you fill a larger working batch.

Is a thinner the same as a cleaner?

Their jobs differ: thinner adjusts the paint mixture; cleaner removes paint from the equipment. Use the product specified for the task.

Should I choose 60 ml or 200 ml?

Choose 60 ml for the smaller bottle format. The 200 ml 71.161 guide discusses preparing repeat mixtures from the larger format; bottle size does not set a different mixing ratio.

For this project

Vallejo Airbrush Thinner 71.361, 60 ml

Choose the 60 ml bottle for the small, controlled paint mixtures discussed here, after confirming the additive specified by your paint range.

View Vallejo Airbrush Thinner 71.361, 60 ml

If the main issue is paint drying on the needle, compare the role of Airbrush Flow Improver before changing the mixture again.

Explore model paints and finishing supplies or return to the Hobby Learning Center for more painting and model-building help.

Continue planning the model-kit project

Use the guide for identity and planning, then verify the exact kit, tools, paint and included parts before ordering.