Plastic Model Guides
Use Vallejo Flow Improver 71.362 for Paint Drying at the Tip

Vallejo Airbrush Flow Improver 71.362 is the 32 ml bottle of an additive intended to improve paint flow and slow drying on the airbrush needle. It is useful to consider when paint begins to dry at the tip during a session, after you have confirmed that the airbrush is clean and the additive is suitable for the paint.
Recognize the problem you are trying to solve
A spray that becomes less consistent during a session can have more than one cause. Inspect the needle tip and paint path using the airbrush maker’s procedure. Existing dried paint needs cleaning; adding a flow improver to fresh paint does not remove that residue.
Once the equipment is clean, make a small normal paint mixture and test it on a spare surface. If drying at the needle is the recurring difficulty, compare a separate sample prepared with Flow Improver. Keep the airbrush settings and the test pattern consistent so you can judge the additive’s effect.
| Auxiliary | Main adjustment | When to choose it |
|---|---|---|
| Flow Improver | Flow and drying at the needle | When paint drying at the tip interrupts the intended application |
| Airbrush Thinner | Paint fluidity and dilution | When the paint preparation calls for thinning |
| Airbrush Cleaner | Removal of paint residue | When the equipment needs cleaning |
Use the stated starting guidance carefully
Vallejo recommends 1–2 drops of Flow Improver for 10 drops of paint. Use that guidance with the directions for the exact paint, then test the result. Drop size is not a precision volume measurement, so keep your dispensing method consistent rather than treating drop counts from unrelated bottles as an exact laboratory ratio.
If you already use another additive, check the paint directions before combining adjustments. Start with a small separate mixture and avoid adding more simply because the spray has changed. Inspect the needle and reconsider the mixture when the behavior becomes worse or remains inconsistent.
Judge the dried finish as well as the spray
A smoother session is only part of the goal. Allow the sample to dry according to the paint instructions and check whether its coverage and finish suit the model. If you plan to mask or recoat it, test that next step on the sample too.
Questions before you start
Is 71.362 a 32 ml bottle?
Yes. The manufacturer’s current catalog and the pictured bottle identify 71.362 as 32 ml.
Can Flow Improver clean a blocked airbrush?
Its role is to modify the paint’s flow and drying behavior. Clean existing residue using the appropriate cleaner and the airbrush maker’s procedure.
Should I replace all thinner with Flow Improver?
Choose the additives by their functions and the paint directions. Flow Improver and thinner are not automatically interchangeable; the paint-preparation guide explains the dilution step.
For this project

Vallejo Airbrush Flow Improver 71.362, 32 ml
Choose this additive for the flow and needle-drying adjustment described above, then test the recommended starting mixture with your paint.
Explore model paints and finishing supplies or return to the Hobby Learning Center for more painting and model-building help.

