News
First Gear Komatsu Dozers: PAT Blades, Rippers and Scale Choices

Choose a dozer by its front blade and rear attachment as well as its Komatsu model number. The PAT-blade D51 and D71, multi-shank-ripper D65 and single-shank-ripper D375 offer visibly different equipment arrangements. Scale is a separate decision: a 1:64 or 1:87 D155 should not be mistaken for a proportion-matched addition to a 1:50 machine row.
Compare First Gear dozers and construction equipment

D51PXi-24 and D71PXi-24: the PAT-blade choices
The 1:50 D51PXi-24, 50-3461, lists a PAT blade, rear hitch and working metal tracks. Its approximate dimensions are 3.85 inches long, 2.65 inches wide and 2.75 inches high.
The 1:50 D71PXi-24, 50-3425, also lists a PAT blade and metal tracks, with a rear drawbar. Its approximate footprint is larger at 5 inches long by 3.5 inches wide, with a 2.75-inch listed height.
Choose between them by the exact machine and size you want. PAT identifies the represented blade arrangement; it does not promise powered miniature hydraulics. Follow the supported manual movements rather than trying to reproduce every motion of a full-size machine.
D65EX-17: choose it for the multi-shank ripper
The 1:50 D65EX-17 SIGMADOZER, 50-3245, lists an adjustable front blade, metal tracks and a multi-shank rear ripper. Its approximate dimensions are 5.25 by 2.75 by 2.5 inches.
The rear equipment is a practical reason to choose this model for a display that shows both ends of the machine. A ripper-equipped dozer has a different outline from the rear-hitch and drawbar examples above.
For a gift based on a particular machine, check the rear attachment in the gallery rather than assuming all yellow Komatsu dozers carry the same equipment.

D375A-8: a larger single-shank-ripper display
The 1:50 D375A-8, 50-3426, has a broad front U-blade and a single-shank rear ripper. At approximately 8.25 inches long, 4 inches wide and 3.5 inches high, it needs noticeably more space than the compact D51.
Choose it for the D375 subject and the large crawler presentation. Its blade width matters when measuring a shelf or transport platform; measuring only the track spacing can miss the widest part.
Metal tracks and adjustable attachments are display features, not a reason to push the model through soil or load the blade. Small fittings and linkages need careful handling.
Need a different collection scale?
The D155AX-8 SIGMADOZER, 60-0325, is a 1:64 alternative with an adjustable blade and single-shank ripper. Its approximate dimensions are 5.25 by 2.5 by 2.125 inches.
For an HO refuse-facility scene, the 1:87 D155AX-8 waste handler, 80-0347, is a separately identified specialist version. Choose it for that scale and waste-handling subject, not as another color of the 1:64 model.
Make the attachment and pose part of the decision
Choose a PAT-blade model for that configuration, the D65 for its multi-shank ripper or the D375 for the larger single-shank presentation. Leave room behind a ripper-equipped model and beside a positioned blade.
A shared scale does not prove trailer fit. Before adding a lowboy, check the model's full width, rear overhang and supported transport pose. Select the dozer you want to collect, then plan its surroundings.

