News
First Gear Komatsu Excavators: PC78US, PC290LCi, HB365LC or PC900LC?

Choose the PC78US for the smallest listed footprint, the PC290LCi or HB365LC for an intermediate-size excavator display, or the PC900LC for the largest of these four models. All are First Gear 1:50 collectibles. Their shared scale makes the different machine sizes part of the comparison rather than an accidental mismatch.
Compare First Gear Komatsu excavators

PC78US-11: a compact starting point
The PC78US-11, 50-3474, is listed at approximately 4.75 inches long, 2 inches wide and 2.25 inches high. It provides the smallest catalog footprint in this comparison.
The described features include a functional blade, boom, arm and bucket, a rotating upper body and rolling metal tracks. Choose it when a compact excavator is the intended subject or when a smaller model belongs beside other equipment in a 1:50 scene.
Its small catalog dimensions are not a guarantee that every extended-boom position stays inside that space. Sketch the pose you want before deciding that it fits a narrow shelf.
PC290LCi-11: a larger tracked-machine display
The PC290LCi-11, 50-3462, has approximate dimensions of 8.25 by 2.75 by 2.75 inches. It is a different named excavator from the PC78US, not merely a larger-scale version of it.
The listing includes a functioning boom, arm and bucket, a 360-degree rotating upper structure and rolling metal tracks. Choose it for that machine identity and the larger display presence. A blade listed for the PC78US should not be assumed to accompany this model.
HB365LC-3: choose the hybrid subject
The HB365LC-3 hybrid excavator, 50-3412, measures approximately 9 by 2.75 by 2.5 inches in the catalog. Its documented moving features likewise include the boom, arm, bucket, rotating upper structure and metal tracks.
Choose it when the HB365LC hybrid subject is important to the collection. Hybrid identifies the represented full-size machine; it does not mean the miniature has a powered hybrid drive. The same distinction applies to electronic or machine-control associations suggested by other model designations.

PC900LC-11: reserve the widest space
The PC900LC-11, 50-3500, is approximately 11.75 inches long, 3.75 inches wide and 4.25 inches high. It is the largest listed model in this group and the one that most clearly needs its own planned display area.
Its boom, arm, bucket and upper-body movement can support different poses, while the rolling metal tracks are part of the described undercarriage. Allow clearance around the counterweight and bucket as the upper body turns; track width alone is not the complete space requirement.
Choose the working pose before the display case
All dimensions above are approximate catalog figures, not verified maximum reach measurements. An extended digging pose can need more length, a raised boom needs more height, and a turned upper structure needs room beyond the track outline.
These are manually posed collectible models, not remote-controlled digging machines. Use the supported movements gently and keep small rails and fittings clear when moving a model.
Plan transport separately from the excavator shelf
A 1:50 excavator does not become a proportion-matched load for a 1:64 lowboy. Even a same-scale trailer requires checks of usable deck width, track contact, overhang and transport height. The equipment-hauler guide explains those separate fit questions.
Choose the excavator identity and size you want first. Then compare the current offer, desired pose and available space rather than buying the largest model as an assumed quality upgrade.

